Results 1 to 5 of 5

Thread: ]NeoBoot by gutosie 6.41

  1. #1
    Join Date
    Aug 2010
    Posts
    14,631
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    70

    Default ]NeoBoot by gutosie 6.41

    NeoBoot by gutosie 6.41




    972/5000
    Supported tuners: All VuPlus models - clones too, Octagon SF4008, MiracleBox Mini, Formuler (Tests - DM900)

    NeoBoot is not yet fully functional in the DM900 and OctagonSF4008 models - the improvement work is under way ...

    The first neoboot installation

    Run the following command in the supported tuner terminal:

    opkg update

    opkg install curl

    curl -kLs [Only Registered Users Can See Links. Click Here To Register]

    WARNING!!! Redistribution of the program version and making modifications IS PERMITTED subject to the observance of this copyright notice.

    The author DOES NOT bear ANY responsibility for the consequences of using this program and for the use of the information contained herein.

    You carry out the installation and modifications at your own risk !!! Before installing or updating Neoboot read carefully all information contained here and in the plugin. !

    Thank you to all my colleagues supporting the neoboot project.

    I also thank my colleagues supporting the project.

    gutosie




    :download:

    [Only Registered Users Can See Links. Click Here To Register]

  2. Thanks coco23 thanked for this post
  3. #2
    Join Date
    Aug 2010
    Posts
    14,631
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    70

    Default

    NeoBoot installation description by gutosie
    I decided to describe the correct process of installing the neoboot program on STB tuners

    ATTENTION !!! The description applies to the neo installation in image OpenPli, because this image works best with the NeoBoot (a) project

    1. We install the openpli system in our tuner
    2. Plug the USB stick into the USB port
    3. We do a complete reboot of the tuner
    4. Go from the remote control to Menu> Settings> System> Advanced Settings> Hard Disk> Initialize, here I select our disk by pressing OK and Initialize, I am waiting for it to finish formatting.
    5. We do a complete reboot of the tuner.
    6. We check with the command:
    Code:
    moun
    under which sd * 1 we have our drives, example:
    / dev / sda1 on / media / hdd type ext4
    / dev / sdb1 on / media / usb type ext4
    the mount command returns us from:
    sda1 is mounted under media / hdd and this is our HDD drive
    sdb1 is mounted under media / usb and this is our PENDRIVE drive
    7. Next, you should give a label for disks, we do it with a command for HDD
    Code:
    tune2fs -L hdd / dev / sda1
    for USB
    Code:
    tune2fs -L usb / dev / sdb1
    Important !!! if, for example, we have only a pendrive and there is no hard disk connected, then it should be given to the pena label hdd so that the pendrive would be recognized by the system as hdd, by the command:
    Code:
     tune2fs -L hdd / dev / sda1
    continue to create the movie directory with the command:
    Code:
    mkdir -p / media / hdd / movie
    we create the movie directory to be able to record

    after these treatments, it is good to give the tuner a deeply awake, by command:
    halt

    Warning!!! we do not do any other activities related to installing devices on our tuner if we want to install a neoboot. It is also important to have attached disks from the very beginning which will be permanently in our stb.

    After waking up the tuner, we go to the NeoBoot installation

    1. We are doing a packet upgrade with the command:
    opkg update
    2. Install the curl package with the command:
    opkg install curl
    3. We install the neoboot project in the system by command:
    curl -kLs [Only Registered Users Can See Links. Click Here To Register]
    The above command will install NeoBoot itself (a) and reboot the system

    4. Menu> NeoBoot and here press on the remote control successively, blue - Device Manager, ok, choose for example the cursor [i] Mount: / media / hdd Mount: / media / usb [/ i] and press green to save
    5. We return EXIT to the neoboot installation on a usb or hdd disk
    [Only Registered Users Can See Links. Click Here To Register]
    6. We choose on which medium we want to have neo and install -OK

    Recommended installation on a pendrive, because in the case if any image does not start up, simply unplug the pen and restart the tuner manually, it should start the system with flash, otherwise we will unscrew the HDD: wesołek:

    That's all
    [Only Registered Users Can See Links. Click Here To Register]
    recommended installation with command !!! because the installation command will give appropriate permissions to files, without this neoboot will not work properly or not at all: jolly:

    if the image does not start in neoboot and we have a telnet or shh (putty) connection then you can try to use the command:

    ln -sf "init.sysvinit" "/ sbin / init"
    echo "Flash"> /media/neoboot/ImageBoot/.neonextboot
    reboot -f
    Całkowite odinstalowanie neoboota z polecenia konsoli
    uruchamiamy image Flash i wydajemy polecenie:

    Code:
    rm -R /usr/lib/enigma2/python/Plugins/Extensions/NeoBoot
    rm -R /media/*/ImageBoot/.Flash
    rm -R /media/*/ImageBoot/.neonextboot
    rm -R /media/*/ImageBoot/.version
    rm -R /sbin/neoinit*
    ln -sfn /sbin/init.sysvinit /sbin/init  
    cp -rf /etc/fstab.org /etc/fstab 
    rm /etc/fstab.org 
    cp -rf /etc/init.d/volatile-media.sh.org /etc/init.d/volatile-media.sh
    rm /etc/init.d/volatile-media.sh.org 
    opkg install volatile-media
    sleep 2
    killall -9 enigma2
    jeśli proces się zatrzyma to klikamy Enter w okienku konsoli, E2 na koniec powinna się zrestartować
    Last edited by ZYGA; 08-01-2018 at 13:35.

  4. #3
    Join Date
    Aug 2010
    Posts
    14,631
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    70

    Default

    NeoBoot by gutosie 6.43




    Supported tuners: All VuPlus models - clones too, Octagon SF4008, MiracleBox Mini, Formuler (Tests - DM900)

    NeoBoot is not yet fully functional in the DM900 and OctagonSF4008 models - the improvement work is under way ...

    The first neoboot installation

    Run the following command in the supported tuner terminal:



    Code:
    opkg update
    
    opkg install curl
    Code:
    curl -kLs [Only Registered Users Can See Links.  Click Here To Register]
    WARNING!!! Redistribution of the program version and making modifications IS PERMITTED subject to the observance of this copyright notice.

    The author DOES NOT bear ANY responsibility for the consequences of using this program and for the use of the information contained herein.

    You carry out the installation and modifications at your own risk !!! Before installing or updating Neoboot read carefully all information contained here and in the plugin. !

    Thank you to all my colleagues supporting the neoboot project.

    I also thank my colleagues supporting the project.
    Tłumacz Google dla Firm:Narzędzia dla tłumaczyTłumacz stron



    [Only Registered Users Can See Links. Click Here To Register]


    :download:

    [Only Registered Users Can See Links. Click Here To Register]
    Last edited by ZYGA; 02-01-2018 at 19:37.

  5. #4
    Join Date
    Aug 2010
    Posts
    14,631
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    70

    Default

    NeoBoot by gutosie 6.45







    [/center]
    Supported tuners: All VuPlus models - clones too, Octagon SF4008, MiracleBox Mini, Formuler (Tests - DM900)

    NeoBoot is not yet fully functional in the DM900 and OctagonSF4008 models - the improvement work is under way ...

    The first neoboot installation

    Run the following command in the supported tuner terminal:



    Code:
    opkg update
    
    opkg install curl
    Code:
    curl -kLs [Only Registered Users Can See Links.  Click Here To Register]
    WARNING!!! Redistribution of the program version and making modifications IS PERMITTED subject to the observance of this copyright notice.

    The author DOES NOT bear ANY responsibility for the consequences of using this program and for the use of the information contained herein.

    You carry out the installation and modifications at your own risk !!! Before installing or updating Neoboot read carefully all information contained here and in the plugin. !

    Thank you to all my colleagues supporting the neoboot project.

    I also thank my colleagues supporting the project.
    WARNING!!!
    if the image does not start in neoboot and we have a telnet or shh (putty) connection then you can try to use the command:


    Code:
    ln -sf "init.sysvinit" "/ sbin / init"
    echo "Flash"> /media/neoboot/ImageBoot/.neonextboot
    reboot -f
    Neoboot in the current version is intended only for the image of OpenPLi 6.1 in flash.

    Please do not combine and do not put Neoboot on other image in flash, including even lower editions of OpenPLi.


    gutosie
    [Only Registered Users Can See Links. Click Here To Register]

    :download:

    [Only Registered Users Can See Links. Click Here To Register]
    Last edited by ZYGA; 05-01-2018 at 18:50.

  6. #5
    Join Date
    Aug 2010
    Posts
    14,631
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Rep Power
    70

    Default

    NeoBoot 6.50 by gutosie






    [quote name='gutosie']
    WARNING!!! Redistribution of the program version and making modifications IS PERMITTED subject to the observance of this copyright notice.

    The author DOES NOT bear ANY responsibility for the consequences of using this program and for the use of the information contained herein.

    You carry out the installation and modifications at your own risk !!! Before installing or updating Neoboot read carefully all information contained here and in the plugin. !

    Thank you to all my colleagues supporting the neoboot project.

    I also thank my colleagues supporting the project.
    WARNING!!!
    if the image does not start in neoboot and we have a telnet or shh (putty) connection then you can try to use the command:


    [code]ln -sf "init.sysvinit" "/ sbin / init"
    echo "Flash"> /media/neoboot/ImageBoot/.neonextboot
    rebNeoboot in the current version is intended only for the image of OpenPLi 6.1 in flash.

    Please do not combine and do not put Neoboot on other image in flash, including even lower editions of OpenPLi.
    gutosie
    [Only Registered Users Can See Links. Click Here To Register]
    :download:

    [attachment=11655:NeoBoot-BY-gutosie_20180102-iNB.sh-packed.Lucek_all.ipk.zip]

    temat pod dyskusję :[Only Registered Users Can See Links. Click Here To Register]
    Download [Only Registered Users Can See Links. Click Here To Register]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •