View Full Version : IncubusCamd

15-10-2008, 19:48
new emu: incubus
for ipbox hd 900/9000 soon
with cccam gbox newcs protocols


21-10-2008, 00:14
incubusCamd, cam daemon.

Available for processor types: sh4 (tested only on Cuberevo, Cuberevo mini, kathrein ufs910 with e2)

Use the e2 version on kathrein with enigma 2 on board, the other version on ipbox 9000/900 with dgstation firmwares

Card client for protocols: cccam, gbox, newcamd 5.20, newcamd 5.25, radegast old, radegast new, aroureos

.conf and .prio files can be inserted in the /var/bin directory, or in /etc, or in /var/keys

20/06/2008, V0.50, First public release
camd33 and camd35 is really much unstable so I think it's not yet ready for public,
asap it will be ready i'll publish it ;)
This is the first release, you can't see any log on the console because
I don't wanna people read infos that could put them on the strange way.
However logs on console are really good to know if bugs are the cause of your problem or
simply if you are so noob to not be able to configure it correctly.

Read very well config files and don't say something you don't know.

This is not a fully working cam, some functions are not implemented/enabled because they are not ready for public and
I think people don't wanna functions that are working not really good as they expected!
(also this version is a beta version, but i wanted to put some hopes on people that believe a cam is better than othern one,
we have tested the cam on many decoders and we can say this cam is not bad at all also in beta and not full working mode :p)

So for the first release I choose to public only client side of the cam. :)

I want to thank raton_craquero for givin' me the possibility to know really a lot of things on how to use dvb_api and i have
to admit that i really like his config file structure and his log functions, so i decided to use them with his agreement :)
Thank you!

Regards, the IncubusCrew!


21-10-2008, 00:51

Also on-line from Sif-team panel at Sif install


27-10-2008, 07:03
don't forget to deactivate Thimeshift. i read about, that timeshift is not work with incubus.

05-01-2009, 14:26
Incubuscam v.0.55 for Revo/mini

04/01/2009, V0.55
- fixed some little bugs on DGStations api interface
- added multi descrambling support for DGStations HD original firmwares (PIP, timeshift, recording channels, second tuner support)
- added version sigma to be used with AzBox HD
I've been noticed about many peoples not able to view some channels, don't forget to edit your prio file. Editing that file will give you the ability to chose the right pid wich the cam should be select (if you will not edit it, the cam will use the first pid and then try to use other pids, but this will take much more time to be able to see something)

incubusCamd_0.55.rar 560.82 KB

05-01-2009, 14:28
Latest Version of Incubus Camd

incubusCamd-0.55.tar.gz 203.88 KB

06-01-2009, 13:03
Its working allot better mow , it works as a client with cccam 2.0.11 with now problems , sow forget the limit of 2.0.9 and something very nice is that in cccaminfoPHP it been recognize as cccam 2.0.11
Thats Cool ;)

06-01-2009, 14:52
Well how about ip box 910 which cam can you use for more than one url line in the cfg

07-01-2009, 09:14
if you want to use cccam only incubus with one line, but if you want gbox than mbox 0.15 is fine

07-01-2009, 12:06
incubusCamd.0.55 perablem withe channel two system (iredeto-seca)

becuse when change system freeze cahneel

08-01-2009, 11:41
The problem will be two systems SECA-IREDETO and IncubusCamd. I have tested Tv Max(badr 26E) and none of them would work.

when change system SECA to IREDETO or IREDETO to SECA peroblem

freeze channel

18-01-2009, 21:47
incubusCamd 0.55 + newcs 1.64

12-02-2009, 20:21
IncubusCamd 0.55 + newcs 1.65


07-03-2009, 21:58
Incubuscamd V0.70

- added auto-reconnection on servers (if lost connection previously)
- fixed a bug that caused the lost of cws
- added multi-server support for cccam (you can connect as a client to more than one server, this is a beta try, seems almost stable but it could have many bugs)
- fixed nagra providers (nagra3 and nagra2) interpretation (now they should work on cccam protocol, but i
- fixed nagra providers (nagra3 and nagra2) interpretation (now they should work on cccam protocol, but i've not tested it so please report if you find bugs)
- fixed biss over cccam protocol
- added possibility to get emu shared data by server on cccam protocol (see config file)
- added logs information from console and into file (see config file)
- changed a bit the config file
incubusCamd_0_70.rar 420.20 KB

12-03-2009, 18:52
Incubuscamd v.0.75 released

12/03/1956, V0.75
- fixed auto-reconnection on servers
- fixed multi-server connections
- fixed many bugs on memory that caused cam's crashes
- fixed timeshift
- fixed audio change selection wich cause the stop of video/audio on original dgs firmware

GBOX protocol still not fully supported


20-03-2009, 20:06
incubusCamd v 0.80


20/03/2009, V0.80
- added caids tunneling (check the config file to know how to set them, used for example with PremiereHD card on betacrypt)
- fixed cryptoworks provider id recognition
- gbox protocol multiserver added
- newcamd fixes for multiserver
- radegast fixes for multiserver
- aroureos fixes for multiserver
- added test version of internal emu (see config file to know how to enable it) v 0.80

incubusCamd_0_80.rar - 0.42MB ()

Fast Download ()

24-04-2009, 13:35
- second try fixing caids tunneling (with PremiereHD card on betacrypt, i can't test it so, i don't know if it works or not)
- first try fixing caid 0603 (same as premierehd, i can't test it, please report if it works or not)
- fixed long ecm bugs
- full support for cccam 2.1.0 protocol
- many minor fixes for stability (hope this version will be better than last one)

21-05-2009, 15:15
IncubusCamd v0.83


- fixed caid tunneling for premierehd on betacrypt over cccam
- fixed bug for caid 0603 over cccam
- fixed tv vlandeeren bug over cccam
- compatibility with cccam 2.1.1

For sh4 :wink1:


17-06-2009, 23:46
IncubusCamd 0.85

17/06/2009, V0.85

- deleted old priority system for caid, now will be used firstly the prio and then a cycle selection

- SID in hex value instead of dec one

- fixed some bugs on caid ecm parsing

- fixes for stability/less-crashes (crashes were made by the pmt handling, using pmt file wich the writes is slower than the channel change,
now should be fixed in almost all cases)

- still open the 2.1.1 protocol support and previous version

- fixed a bug on reading keys for the internal emulator, now also unsupported softcam.key files are skipped in the unknown fields
(read the softcam.key file to see how to build a new one)

22-06-2009, 13:16
IncubusCamd v0.86

- fixed one more bug for better stability and speed
- support for enigma 1 on cuberevo (use .sh4_e2 version)

08-07-2009, 17:00

08/07/2009, V0.87

- fixed a bug on channel change stability
- fixed a bug on ecm cache
- support for caid 0603 on JSC sport channels


09-07-2009, 22:36
9/07/2009, IncubusCamd v0.88

- fixed another bug on irdeto channels

incubusCamd_0_88.tar.gz 453.74 KB

12-07-2009, 22:40
emu manager E2

manager V1.4
put the files in the right directory and give them atrib. 755


04-08-2009, 17:45
IncubusCamd 0.89

WARNING: config file is changed a bit, now is less difficult and many features
are added but not completed yet

- added camd33 protocol
- added camd35 protocol
- added possibility to define .prio and SoftCam.Key file directories
- added a check on multi istances of running incubusCamd to prevent errors (i read that many people start many times
the cam and this will crash connections to servers)
- fixed cccam 2.1.2 support for check on protocol version
- now you can set priority for each provider/caid combination, by selecting if you prefer the cam will check firstly
internal emulator, card share protocol or internal card reader (not yet implemented the card reader function, it-s a future plan)
check the "check_priority" option in the config file
- now you can set card share protocol priority, check the "cs_protocol_order" option in the config file
- changed a bit the configuration file to allow you to set all protocols data inside the [Servers] section, check the config file to know more

incubusCamd_0_89.tar.zip 465.03 KB

06-08-2009, 09:56
IncubusCamd 0.90

- fixed the bug for caid/provider selection for protocols
- optimized a little bit more the protocol selection (lot of improvements)
- added console server interface (you can log by telnet, check the config file: console_logs_broadcast, console_logs_broadcast_port)
- added more infos for current server and info like that, in file /tmp/ecm.info


10-08-2009, 23:59
IncubusCamd v.0.92

10/08/2009, V0.92

- solved once for all bugs with spaces and comments in config files


06-09-2009, 22:35
- fixed ecm pid debug log for biss encryption
- fixed a bug on filters (more stability)
- add seca2/seca3 handler (i suggest to use it only on providers wich uses both seca2 and seca3 with same provid value,
like TVVlandeeren and Canal Digitaal)
- fixed bug on reading prio/ignore
- updated web interface
- newcamd and radegast are now managed in a better way, no more connecting/disconnecting is done if no server
is disconnected before (or the connection would be broken)
- fixed a bug wich will not find card on cccam protocol if multi provider (like seca2/seca3 pids) are declared with the same values
- added emm management (it works only with newcamd servers wich use the EMM in the config line, do not forget to enable also
"process_emms_on_cs_mode" and your emm-g/s/u blocker options)
- fixed some bugs with timeshift using original dgs based firmwares (if you find more bugs report them as usually)
- fixed some bugs with PIP using original dgs based firmwares (if you find more bugs report them as usually)

EMM for internal emu will be enabled when testers will report emm are working ok with almost all codifies.
Do not forget this is a beta version so it could be some EMM will not work as expected, but i can't test every codify
in the world and every smart card for each provider, so... you know, just report what works and what does not!


04-11-2009, 20:50
04/11/2009, V0.94
- fixed bugs on EMM handling for various codifies
- fixed some memory bugs
- many other internal code improvements
- no more beta code used in teta version

22-03-2010, 13:54
IncubusCamd v.0.98 released.

20/03/2010, V0.98

- fixed a bug on reading .config file if the chid=-1 is set
- fixed a bug on reading .config file if "chid=" param uses more than 2 chids
- fixed some crash bugs

IncubusCamd on CCcam v2.1.4 isn't able to connect properly because of new commands on last original CCcam, use older version as server.


12-05-2010, 22:03
IncubusCamd v.1.00

11/05/2010, V1.00

- fixed a bug on Irdeto 2 channels over cccam protocol
- added log for ChID value if Irdeto channel is selected
- fixed some auto reconnections bugs (for all protocols)
- fixed EMM filters for Dreamcrypt
- first try to fix Conax EMMs
- fixed EMM filters for Cryptoworks

( 3%2FincubusCamd_1_00.tar.gz)
( iles%2F386018793%2FincubusCamd_1_00.tar.gz)

26-05-2010, 15:40
IncubusCamd v.1.10 (added server functionality)

25/05/2010, V1.10

- fixed Conax EMMs

- added server functionality/multiclient support for cccam protocol (this means you can use the incubusCamd as a server):you can also reshare your local card if connected as newcamd/radegast client (see the config file for more info, [Clients] section and
all over the config for other special customizations)


12-06-2010, 13:01
IncubusCamd v.1.15

11/06/2010, V1.15

- fixed a bug on clients' filters
- improved dw searching if timeshift and PIP enabled
- added -help option, -config-file option, -debug-level option given as parameter to the executable file
- fixed some info on the webif (more need to be added/fixed)
- fixed some problems with clients connection and few CCcam versions
- added channel info file (used in the webif, but this feature in the webif is still missing)
- added provider info file (used in the webif)


12-06-2010, 13:12
IncubusCamd v.1.15


incubusCamd-1.15 for Sif Image


13-06-2010, 18:37
IncubusCamd v1.16


- fixed a memory leak bug on cccam connections
- added in webif ecm requests information for clients/servers
- fixed multidescrambling on enigma2 for sh4


04-07-2010, 23:16
IncubusCamd v1.17


- fixed a bug for cuberevo-digital firmwares on setting pids
- fixed another bug on multidescrambling on enigma2 firmwares