Barry Allen PPC E2

[LilleMama]

Barry Allen v4.4.6 ppc/mipsel

================================================== ==
Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.



2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.


And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.




================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!
================================================== ==
ons-barryallen_4.4.6_powerpc.zip ()

ions-barryallen_4.4.6_mipsel.zip ()

[sotiris70]

Barry Allen Version 4.4.9 by gutemine from 24.03.2008
================================================== ==
Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)
================================================== ==
Version 4.4.9 by gutemine from 24.03.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 support, Flashing and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr
0.4.3 feeding the GNU
0.4.4 time for a new version
4.4.6 preliminary dm800 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for the enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen on the Dreambox !!!!
================================================== ==

()

[pumuckl]

Barry Allen for Dreambox 7020 and 600

Version 4.5.0 by gutemine from 16.05.2008

Release infos

0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr,
enigma1 plugin
0.4.3 feeding the gnu
4.4.0 time for a new version
4.4.6 preliminary DM800 support
4.5.0 DM 800 support

Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for his enigma1 plugin !

Have Fun using Barry Allen
on your Dreambox !!!!


( .zip)
( 3fdd25ce760452.html)

[sotiris70]

================================================== ==
Barry Allen for Dreambox 7020 and 600
================================================== ==
Version 4.5.5 by gutemine from 22.05.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr,
enigma1 plugin
0.4.3 feeding the gnu
4.4.0 time for a new version
4.4.6 preliminary DM800 support
4.5.0 DM 800 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for his enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen
on your Dreambox !!!!
================================================== ==


()

[pumuckl]

Barry Allen for Dreambox 7020 and 600
================================================== ==
Version 4.6 by gutemine from 08.08.2008
================================================== ==
Release infos
================================================== ==
0.1.0 first official Version
0.1.1 add LCD support, copy, rename and erase
0.2.0 add backup and more tools options
0.2.1 bugfixes
0.2.2 quod erat demonstrandum
0.3.0 WebIF and Wizards
0.3.1 nl, 12 images, bugfixes
0.3.2 tar.bz2 images, instant extract
0.4.0 OE 1.5 and user scripts WebIF
0.4.1 keep squashfs and Barry Allen gets fat
0.4.2 time for a new version and new language fr,
enigma1 plugin
0.4.3 feeding the gnu
4.4.0 time for a new version
4.4.6 preliminary DM800 support
4.5.0 DM 800 support
4.6.0 DM 8000 support
================================================== ==
Thanks to noggie for his nfi file tools !
Thanks to DarkVolli for his enigma1 plugin !
================================================== ==

1) Prerequisites

During the installation there has to be CF
card in the Dreambox (attention: insert or remove
into Dreambox 7025 cardreader only when Dreambox
is turned off), or an USB stick which is successfully
detected (in case of problems try an USB Hub).

If Barry Allen on USB is used then put
the CVS Image from OoZooN in Flash, because this image
has the USB drivers permanently built into the kernel.

If neither CF card not USB Stick are attached then
installation takes place on the Harddisk. Because
the images then also run from there it will run
permanently and it could be necessary that you disable
Harddisk Standby in the images to allow running Barry
Allen stable from Harddisk.


2) Installation

First boot from Flash and then copy the file
enigma2-plugin-extensions-barryallen*.ipk
to /tmp with ftp (TCP/IP must be working already).

If you have an image in Flash that offers a Blue
Pannel Manual Addon Install, then you can use this
functionality to install the ipk file.

If not, then install Barry Allen by entering the
following commands in a Telnet session:

cd /
ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

Then restart enigma2 and the Barry Allen Plugin
shoudl show up under Games / Plugins.

In the Images installed by Barry Allen you don't have
to install the Barry Allen Plugin anymore.
The Barry Allen Plugin integrates himself into then
automatically during the image extract.

And you can remove Barry Allen if you are booted
from Flash:

ipkg remove enigma2-plugin-extensions-barryallen

3) Usage

There is now the enigma2 Plugin of Barry Allen included
under Games / Plugins of the enigma2 menu,
which offers the full functionality of Barry Allen.

For extracting of nfi images in Barry Allen copy the
image files to /MB_Images (normally a link to
/media/hdd/MB_Images created during Barry Allen
installation)

If there are Problems with image extraction or other tasks
with the enigma2 plugin try doing it in telnet:

cd /media/ba
ba.sh extract nameoftheimage

On the next reboot this new Image should be available
in the bootmanager for choosing to boot it and then it
can be customized and used as usual.

The Bootmanager now should remember the last booted
image and hence recordings from Deepstandby should work
now.

================================================== ==
Have Fun using Barry Allen
on your Dreambox !!!!
================================================== ==


()

[amirshakila]

Barry Allen, the second Flash for 7020 und 600PVR -
enigma2-plugin-extensions-barryallen_4.6 .34_powerpc.ipk (3,30 MB, )

[LilleMama]

barryallen_4.6.55_powerpc

Thanks to gutemine

BA_4.6.55_E1.zip 3.28 MB

Fast Download ()

[LilleMama]

Barry Allen, the second Flash für 7020 und 600PVR

Barryallen 4.6.62




Fast Download ()

[LilleMama]

Barry Allen 4.6.81

Barry Allen for Dreambox 7020 and 600

.rar

Fast Download ()

[LilleMama]

Barryallen 4.6.83

PowerPC

Barry Allen for Dreambox 7020 and 600

enigma2-plugin-barryallen_4.6.83_powerpc 3.31 MB

Fast Download ()

[LilleMama]

Barryallen 4.6.97

Barry_Allen_powerpc.zip 4.16 MB




()

[satscan]

Barryallen 4.8 .12


BA WITH NEW DEVICE MANAGEMENT IS NOW HOPEFULLY STABLE - PLEASE TEST !

EXTRACTING IMAGES TO FLASH IS STILL IN BETA - PLEASE TEST !

IF YOU HAVE PROBLEMS WITH THE BOOTMANAGER THAT IT DOESN'T REACT TO THE REMOTE CONTROL, THEN PLEASE TRY OUT FIRST THE RC DEVICE SETTINGS AND NOT THE RC LEVELS IN THE BARRY ALLEN SETUP WIZZARD !!!

[LilleMama]

barryallen_4.8.18_powerpc

Thanks to gutemine

Barry Allen, the second Flash for 7020 and 600PVR


()

[LilleMama]

Barry Allen 4.8 .20

Barry Allen for Dreambox 7020 and 600


CODE
OK, where is the 4.8.20 binary tune2fs for subsequent label now in / media / ba / bin there.

If someone makes Ohene upgrade the device to initialize and recognize Him the WW stört, simple device for the BA following:

/ media/ba/bin/tune2fs-L BA / dev/...../part1

Thx gutemine


()

[Lujdzo]

25.10.2009

Barryallen_5.0.16 BETA_ for power pc



()

Fast Download ()

[LilleMama]

Barryallen_5.0.17 for power pc




()

[LilleMama]

BarryAllen 5.1.11



Fast Download ()